Shure ULX-D 4 Digital Wireless Receiver

Shure ULX-D 4 Digital Wireless Receiver

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.

Features

• Predictive switching diversity
• High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
• Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
• Interference detection and alerts provided on both the receiver and Wireless Workbench 6
• Front panel gain adjustment buttons provide up to 60 dB additional gain
• AES 256-bit encryption-enabled for applications where secure transmission is needed
• Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
• Support for frequency coordination with the Axient® Spectrum Manager
• Yamaha device ID allows simplified channel patching on CL consoles
• Rugged metal chassis
• Intuitive front panel LCD menu and controls with lockout feature
• Upgraded LCD with adjustable contrast and brightness
• Audio and RF LED meters with peak indicator
• Removeable 1/2 wave antennas
• Furnished rack hardware

Specifications

• Working Range: 330 ft (100 m) line of sight
• Image Rejection: >70 dB, typical
• RF Sensitivity: -98 dBm at 0.0001 BER
• Latency, Standard Mode: 2.9 ms
• Audio Frequency Response: 20 – 20 kHz (+/-1 dB) Note: Dependent on microphone type
• Total Harmonic Distortion: <0.01%
• Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
• Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
• Full Scale Output, XLR: LINE setting: +18 dBV, MIC setting: -12 dBV
• Power Requirements: 15 V DC @ 0.6 A, supplied by external power supply (tip positive)
• Full Scale Output, 1/4": +12 dBV
• Latency, High Density Mode: 3.2 ms
• Dimensions, L x W x H: 7.8" x 6.7" x 1.7" (197 mm x 171 mm x 42 mm)
• Weight: 2.0 lbs (0.9 kg), without antennas
• Housing: Galvanized Steel
• Network Interface: Single Port Ethernet 10/100 Mbps
• Network Addressing Capability: DHCP or Manual IP address, with or without gateway
• Audio Dynamic Range: Analog Output: >120 dB, A-weighted
• Frequency Range: G50 Band (470 to 534 MHz), H50 Band (534 to 598 MHz), J50A (572 to 616 MHz), V50 (174 to 216 MHz), and X52 (902-928 MHz)

Contents

• (1) Shure ULXD4 Single Digital Wireless Receiver
• (1) Shure PS43US Power Supply
• (2) 1/2 Wave Antenna
• (1) Rackmount Kit
• (1) Operator's Instructions
• (2) 2' BNC Cable
• (1) 3' Ethernet Cable