Shure SLXD4Q+ Quad Channel Receiver (G57: 460 to 608 MHz)

FOUR CHANNELS OF WIRELESS VERSATILITY, WHEREVER REQUIRED

SLX-D® Digital Wireless delivers transparent, 24-bit digital audio and rock-solid RF performance with streamlined network-ready setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design in a convenient full-rack quad configuration, the SLXD4Q+ efficiently saves space and accessories and easily scales to match channel requirements.

FEATURES

• Four channels in one rack space
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4, 3, 2 or 1)
• 4 XLR and 4 1/4" outputs and 2 local ethernet connections
• RF Cascade creates an 8-channel system by linking two SLXD4Q+ together; no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
• Rugged metal construction

SPECIFICATIONS

• Dimensions: 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.), H x W x D
• Weight: 1750 g, without antennas
• Housing: Galvanized Steel
• Power Requirements: 15 V @ 0.9 A

RF Input:

• Spurious Rejection: >75 dB, typical
• Connector Type: BNC
• Impedance: 50 Ω
• Bias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)

Audio Output:

• Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
• Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Configuration:
• 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground)
• XLR: Balanced (1 = ground, 2 = audio +, 3 = audio −)
• Impedance:
• 1/4" (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
• XLR (line): 500 Ω (250 Ω Unbalanced)
• XLR (mic): 150 Ω
• Full Scale Output:
• 1/4" (6.35 mm): +12 dBV Unbalanced, +18 dBV Balanced
• XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection:
• 1/4" (6.35 mm): Yes
• XLR: Yes

Cascade Output:

• Connector Type: BNC

*Note: For connection of one additional receiver in the same band

• Configuration: Unbalanced
• Impedance: 50 Ω
• Insertion Gain: 0–2 dB, typical

Networking:

• Safety agency: CE compliant

Physical specifications:

• Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m (328 ft)

CONTENTS

• (1) Shure SLXD4Q+ Quad Channel Receiver
• (1) Rack Mounting Hardware
• (2) Brackets
• (2) 1/4 Wave Antennas
• (1) PS60 Power Supply
• (1) Ethernet Cable