Martin ELP Par IP

The Martin ELP PAR IP static LED fixture sets a new standard in the static wash category, with unprecedented lumen output, high-intensity narrow zoom, full-gamut color calibration and smart rigging and control features. This fixture is ideal for indoor or outdoor applications with an IP65 rating for protection against dust and water ingress.

The ELP PAR IP makes installation faster and easier, thanks to a quick-focus system and bright angle of projection indicators. Other performance enhancements include a wide zoom range that supports both stage illumination and tight mid-air beam effects, an advanced color-calibration system that delivers accurate color reproduction and precise color temperature control, an extended color mode and a CTC channel that can modify the color space.

Whether lighting an outdoor or indoor theatre production, festival, exhibition or corporate event, fill the stage with color and create stunning beam effects with this versatile LED fixture that sets a new performance benchmark in its class.

FEATURES
Light engine: 7 x 40W RGBW
Full-gamut color-calibration system
CTC control: 1,800–12,850 K
Quick Focus mode allows installation and focusing without the need for a console operator
Clear of projection indicators allow quick installation
Angled power and data connections support a clean cable run that does not impede the fixture or installation
Included truss and floor-mounting yoke with omega bracket connectivity
Lumen output: 3,350
Zoom: 5.5–50˚
Intensity: 329,058 cd
IP65 rating
Dimensions: 315 x 285 x 498 mm (12.4 x 11.3 x 15.7 in) (inc. bracket)
Weight: 9.1 kg (20 lbs)

DYNAMIC EFFECTS
Color mixing: RGBW
Color presets: 48 color presets, virtual color wheel effects
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout
Zoom: Motorized
Color temperature: Variable 1800 – 12 850 K

CONTROL AND PROGRAMMING
Control options: DMX, RDM
DMX channels: 14
16-bit fine control: Dimming, RGB, Zoom
LED color management modes: Raw, extended and calibrated
DMX address setting: Control panel with OLED display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

OPTICS
Light source: 7 x 40 W RGBW Osram LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Beam angle (half-peak): 4.4 – 33.3°
Field angle (one-tenth peak): 5.5 – 50.0°
Binning: Tight color and flux binning
Calibration: Full Gamut and Color Calibration
Maximum output: 3350 lumens
*Figure obtained under manufacturer´s test conditions

PHOTOMETRIC DATA
Wide beam: 3350 lumens
Narrow beam: 1626 lumens
Fixture Center Intensity Narrow Beam: 329058 cd
Fixture Center Intensity Wide beam: 10141 cd
CRI (Color Rendering Index) : >70
CQS (Color Quality Scale): 84
TM-30 Rf (IES TM-30-15 Fidelity Index): 79
TM-30 Rg (IES TM-30-15 Gamut Index): 116
TLCI (Television Lighting Consistency Index): 61
CCT: 6500 Kelvin
LED refresh rate - Standard Mode: 3600 Hz
LED refresh rate - Theatre Mode: 19200 Hz
*All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

CONNECTIONS
AC power in, thru: Neutrik PowerCON TRUE1 TOP
DMX data in, thru: Neutrik IP-rated 5-pin locking XLR

ELECTRICAL
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 11.2 A
Power Factor: 0.99 @ 100 V / 120 V , 0.94 @ 220 V / 230 V / 240 V
Typical current draw: 3.7 A @ 100 V / 120 V , 1.7 A @ 220 V / 230 V / 240 V *
Power Consumption
Typical: 300 W *

PHYSICAL
Length: 315 mm (12.4 in.)
Width: 285 mm (11.3 in.)
Height: 398 mm (15.7 in.) with bracket
Weight: 9.1 kg (20.1 lbs.)