Martin ELP Par

The Martin ELP PAR static LED fixture sets a new standard in the static wash category, with unprecedented lumen output, high-intensity narrow zoom, full-gamut color calibration and smart rigging and control features.

The ELP PAR makes installation faster and easier, thanks to a quick-focus system and bright angle of projection indicators. Other performance enhancements include a wide zoom range that allows both stage illumination and tight mid-air beam effects, an advanced color-calibration system that delivers accurate color reproduction and precise color temperature control, an extended color mode and a CTC channel that allows RGB color mixing around your desired white point.

Whether lighting a theatre production, festival, exhibition or corporate event, fill the stage with color and create stunning beam effects with this versatile LED fixture that sets a new performance benchmark in its class.
Superior output, optics and color rendering, combined with unparalleled ease-of-use and convenience, make Martin ELP CL the leading Color LED ellipsoidal fixture in its class.

FEATURES
Light engine: 7 x 40W RGBW
Full-gamut color-calibration system
CTC control: 1,800–12,850 K
Lumen output: 3,500 lm
Intensity: 390,000 cd
Zoom: 4.2 - 58°
Quick Focus mode allows installation and focusing without the need for a console operator
Clear of projection indicators allow quick installation
Angled power and data connections support a clean cable run that does not impede the fixture or installation
Included truss and floor-mounting yoke with omega bracket connectivity
Low-noise 33 dB Theatre mode operation
IP20 rating
Dimensions: 312 x 287 x 401 mm (12.3 x 11.3 x 15.8 in) (inc. bracket)
Weight: 7.8 kg (17.2 lbs.)

DYNAMIC EFFECTS
Color mixing: RGBW
Color presets: 48 color presets, virtual color wheel effects
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout
Zoom: Motorized
Color temperature: Variable 1800 – 12 850 K

CONTROL AND PROGRAMMING
Control options: DMX, RDM
DMX channels: 14
16-bit fine control: Dimming, RGB, Zoom
LED color management modes: Raw, extended and calibrated
DMX address setting: Control panel with OLED display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

PHOTOMETRIC DATA
Wide beam: 3350 lumens
Narrow beam: 1626 lumens
Fixture Center Intensity Narrow Beam: 329058 cd
Fixture Center Intensity Wide beam: 10141 cd
CRI (Color Rendering Index) : >70
CQS (Color Quality Scale): 84
TM-30 Rf (IES TM-30-15 Fidelity Index): 79
TM-30 Rg (IES TM-30-15 Gamut Index): 116
TLCI (Television Lighting Consistency Index): 61
CCT: 6500 Kelvin
LED refresh rate - Standard Mode: 3600 Hz
LED refresh rate - Theatre Mode: 19200 Hz
*All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

OPTICS
Light source: 7 x 40 W RGBW Osram LEDs
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
Beam angle (half-peak): 4.2° - 38.7°
Field angle (one-tenth peak): 5.1° - 58.6°
Cutoff angle (3%): 5.7° - 69.6°
Binning: Tight color and flux binning
Calibration: Full Gamut Color Calibration
*Figure obtained under manufacturer's test conditions

PHYSICAL
Length: 312 mm (12.3 in.)
Width: 287 mm (11.3 in.)
Height: 401 mm (15.8 in.) with bracket
Weight: 7.8 kg (17.2 lbs.)